Can be used for disinfecting, mould removal and deodorising hard surfaces in amenities, general learning areas and kitchens.

USED FOR

Liquid Bleach

DIRECTIONS FOR USE

Dilution
General Disinfecting: 1:25 - 30mls in 750mls or 1 pump
Mould Removal: 1:1 - 375mls in 750mls or 12.5 pumps

General Disinfecting:
1. Apply Lo Chlor directly onto the pre-cleaned surface.
2. Wipe surface with a clean disposable cloth and allow 10 minutes for the Lo Chlor to activate.
3. Rinse well with clean water; ensure no residue is left behind.

Mould Removal:
1. Apply evenly when the area is dry for the best result. Allow up to 10 minutes contact time.
2. Heavily affected areas may require some agitation.
3. Rinse area to remove any surface dirt and grime then apply a second coat if required.
2. Rinse off when desired result is achieved.